Home Page > Product & Service >Wellhead Accessories

Tubing Anchor

Tubing Anchor

Tubing Anchor introduction

Specifications
1.API Spec11D1
2.Best service,good quality
3.Competive price
4.Large bore - Small OD
5.Field-proven design

TAC-1 Tubing Anchor
Product Explanation:Model TAC-1 Tubing Anchor/Catchers are used to allow placement of tubing in tension. Vertical tubing movement is prevented which in turn lessens sucker rod tubing wear. Their small o.d. and large i.d. permits larger volume production capacities. These fully retrievable tools can be easily adjusted for emergency release by adding or removing shear pins. They are available for 4 1/2” through 7 5/8” casing.

Product Features:
1.Sets securely in any hardness casing, including premium grades
2.Large bore - Small OD
3.Model “L” right hand release or emergency shear release, Model “R” left hand release or emergency shear release
4.Easy adjusted release from 5,000 lbs to 60,000 lbs
5.Drag blocks rather than drag springs
6.Field-proven design

SPECIFICATIONS
Part Number Casing
OD
Casing
Wt
Setting Range Tool
OD
Tool
ID
Threads
Box Up
Pin Down
Min
ID
Max
ID
054-5601-005 4 1/2 9.5-13.5 3.920 4.090 3.75 1.93 2-3/8" EU
8 RD
054-5601-006 5 13.0-18.0 4.276 4.494 4.00
054-5601-056 5 1/2 13.0-23.0 4.670 5.044 4.50 2.00
054-5601-055 5 1/2 13.0-23.0 4.670 5.044 4.50 2.37 2-7/8" EU
8 RD
054-5601-101 6 5/8 17.0-20.0 5.938 6.135 5.50
054-5601-065 6 5/8
7
17.0-20.0
23.0-38.0
5.920 6.456 5.50
054-5601-066 7
7 5/8
17.0-20.0
20.0-39.0
6.413 7.125 5.50